Windows in Kubernetes

• 1: Windows containers in Kubernetes
• 2: Guide for scheduling Windows containers in Kubernetes

1 - Windows containers in Kubernetes

Windows applications constitute a large portion of the services and applications that run in many organizations. Windows containers provide a way to encapsulate processes and package dependencies, making it easier to use DevOps practices and follow cloud native patterns for Windows applications.

Organizations with investments in Windows-based applications and Linux-based applications don't have to look for separate orchestrators to manage their workloads, leading to increased operational efficiencies across their deployments, regardless of operating system.

Windows nodes in Kubernetes

To enable the orchestration of Windows containers in Kubernetes, include Windows nodes in your existing Linux cluster. Scheduling Windows containers in Pods on Kubernetes is similar to scheduling Linux-based containers.

In order to run Windows containers, your Kubernetes cluster must include multiple operating systems. While you can only run the control plane on Linux, you can deploy worker nodes running either Windows or Linux depending on your workload needs.

Windows nodes are supported provided that the operating system is Windows Server 2019.

This document uses the term Windows containers to mean Windows containers with process isolation. Kubernetes does not support running Windows containers with Hyper-V isolation.

Compatibility and limitations

Some node features are only available if you use a specific container runtime; others are not available on Windows nodes, including:

• HugePages: not supported for Windows containers
• Privileged containers: not supported for Windows containers
• TerminationGracePeriod: requires containerD

Not all features of shared namespaces are supported. See API compatibility for more details.

See Windows OS version compatibility for details on the Windows versions that Kubernetes is tested against.

From an API and kubectl perspective, Windows containers behave in much the same way as Linux-based containers. However, there are some notable differences in key functionality which are outlined in this section.

Comparison with Linux

Key Kubernetes elements work the same way in Windows as they do in Linux. This section refers to several key workload enablers and how they map to Windows.

• Pods

  A Pod is the basic building block of Kubernetes–the smallest and simplest unit in the Kubernetes object model that you create or deploy. You may not deploy Windows and Linux containers in the same Pod. All containers in a Pod are scheduled onto a single Node where each Node represents a specific platform and architecture. The following Pod capabilities, properties and events are supported with Windows containers:

  • Single or multiple containers per Pod with process isolation and volume sharing

  • Pod status fields

  • Readiness and Liveness probes

  • postStart & preStop container lifecycle events

  • ConfigMap, Secrets: as environment variables or volumes

  • emptyDir volumes

  • Named pipe host mounts

  • Resource limits

  • OS field:

    The .spec.os.name field should be set to windows to indicate that the current Pod uses Windows containers. The IdentifyPodOS feature gate needs to be enabled for this field to be recognized and used by control plane components and kubelet.

    Note: Starting from 1.24, the IdentifyPodOS feature gate is in Beta stage and defaults to be enabled.

    If the IdentifyPodOS feature gate is enabled and you set the .spec.os.name field to windows, you must not set the following fields in the .spec of that Pod:

    • spec.hostPID
    • spec.hostIPC
    • spec.securityContext.seLinuxOptions
    • spec.securityContext.seccompProfile
    • spec.securityContext.fsGroup
    • spec.securityContext.fsGroupChangePolicy
    • spec.securityContext.sysctls
    • spec.shareProcessNamespace
    • spec.securityContext.runAsUser
    • spec.securityContext.runAsGroup
    • spec.securityContext.supplementalGroups
    • spec.containers[*].securityContext.seLinuxOptions
    • spec.containers[*].securityContext.seccompProfile
    • spec.containers[*].securityContext.capabilities
    • spec.containers[*].securityContext.readOnlyRootFilesystem
    • spec.containers[*].securityContext.privileged
    • spec.containers[*].securityContext.allowPrivilegeEscalation
    • spec.containers[*].securityContext.procMount
    • spec.containers[*].securityContext.runAsUser
    • spec.containers[*].securityContext.runAsGroup

    In the above list, wildcards (*) indicate all elements in a list. For example, spec.containers[*].securityContext refers to the SecurityContext object for all containers. If any of these fields is specified, the Pod will not be admited by the API server.

• Workload resources including:

  • ReplicaSet
  • Deployments
  • StatefulSets
  • DaemonSet
  • Job
  • CronJob
  • ReplicationController

• Services See Load balancing and Services for more details.

Pods, workload resources, and Services are critical elements to managing Windows workloads on Kubernetes. However, on their own they are not enough to enable the proper lifecycle management of Windows workloads in a dynamic cloud native environment. Kubernetes also supports:

• kubectl exec
• Pod and container metrics
• Horizontal pod autoscaling
• Resource quotas
• Scheduler preemption

Networking on Windows nodes

Networking for Windows containers is exposed through CNI plugins. Windows containers function similarly to virtual machines in regards to networking. Each container has a virtual network adapter (vNIC) which is connected to a Hyper-V virtual switch (vSwitch). The Host Networking Service (HNS) and the Host Compute Service (HCS) work together to create containers and attach container vNICs to networks. HCS is responsible for the management of containers whereas HNS is responsible for the management of networking resources such as:

• Virtual networks (including creation of vSwitches)
• Endpoints / vNICs
• Namespaces
• Policies including packet encapsulations, load-balancing rules, ACLs, and NAT rules.

Container networking

The Windows HNS and vSwitch implement namespacing and can create virtual NICs as needed for a pod or container. However, many configurations such as DNS, routes, and metrics are stored in the Windows registry database rather than as files inside /etc, which is how Linux stores those configurations. The Windows registry for the container is separate from that of the host, so concepts like mapping /etc/resolv.conf from the host into a container don't have the same effect they would on Linux. These must be configured using Windows APIs run in the context of that container. Therefore CNI implementations need to call the HNS instead of relying on file mappings to pass network details into the pod or container.

The following networking functionality is not supported on Windows nodes:

• Host networking mode
• Local NodePort access from the node itself (works for other nodes or external clients)
• More than 64 backend pods (or unique destination addresses) for a single Service
• IPv6 communication between Windows pods connected to overlay networks
• Local Traffic Policy in non-DSR mode
• Outbound communication using the ICMP protocol via the win-overlay, win-bridge, or using the Azure-CNI plugin.
  Specifically, the Windows data plane (VFP) doesn't support ICMP packet transpositions, and this means:
  • ICMP packets directed to destinations within the same network (such as pod to pod communication via ping) work as expected and without any limitations;
  • TCP/UDP packets work as expected and without any limitations;
  • ICMP packets directed to pass through a remote network (e.g. pod to external internet communication via ping) cannot be transposed and thus will not be routed back to their source;
  • Since TCP/UDP packets can still be transposed, you can substitute ping <destination> with curl <destination> to get some debugging insight into connectivity with the outside world.

Overlay networking support in kube-proxy is a beta feature. In addition, it requires KB4482887 to be installed on Windows Server 2019.

Network modes

Windows supports five different networking drivers/modes: L2bridge, L2tunnel, Overlay (beta), Transparent, and NAT. In a heterogeneous cluster with Windows and Linux worker nodes, you need to select a networking solution that is compatible on both Windows and Linux. The following out-of-tree plugins are supported on Windows, with recommendations on when to use each CNI:

As outlined above, the Flannel CNI meta plugin is also supported on Windows via the VXLAN network backend (alpha support ; delegates to win-overlay) and host-gateway network backend (stable support; delegates to win-bridge).

This plugin supports delegating to one of the reference CNI plugins (win-overlay, win-bridge), to work in conjunction with Flannel daemon on Windows (Flanneld) for automatic node subnet lease assignment and HNS network creation. This plugin reads in its own configuration file (cni.conf), and aggregates it with the environment variables from the FlannelD generated subnet.env file. It then delegates to one of the reference CNI plugins for network plumbing, and sends the correct configuration containing the node-assigned subnet to the IPAM plugin (for example: host-local).

For Node, Pod, and Service objects, the following network flows are supported for TCP/UDP traffic:

• Pod → Pod (IP)
• Pod → Pod (Name)
• Pod → Service (Cluster IP)
• Pod → Service (PQDN, but only if there are no ".")
• Pod → Service (FQDN)
• Pod → external (IP)
• Pod → external (DNS)
• Node → Pod
• Pod → Node

CNI plugin limitations

• Windows reference network plugins win-bridge and win-overlay do not implement CNI spec v0.4.0, due to a missing CHECK implementation.
• The Flannel VXLAN CNI plugin has the following limitations on Windows:

1. Node-pod connectivity isn't possible by design. It's only possible for local pods with Flannel v0.12.0 (or higher).
2. Flannel is restricted to using VNI 4096 and UDP port 4789. See the official Flannel VXLAN backend docs for more details on these parameters.

IP address management (IPAM)

The following IPAM options are supported on Windows:

• host-local
• HNS IPAM (Inbox platform IPAM, this is a fallback when no IPAM is set)
• azure-vnet-ipam (for azure-cni only)

Load balancing and Services

A Kubernetes Service is an abstraction that defines a logical set of Pods and a means to access them over a network. In a cluster that includes Windows nodes, you can use the following types of Service:

• NodePort
• ClusterIP
• LoadBalancer
• ExternalName

Windows container networking differs in some important ways from Linux networking. The Microsoft documentation for Windows Container Networking provides additional details and background.

On Windows, you can use the following settings to configure Services and load balancing behavior:

Session affinity

Setting the maximum session sticky time for Windows services using service.spec.sessionAffinityConfig.clientIP.timeoutSeconds is not supported.

DNS

• ClusterFirstWithHostNet is not supported for DNS. Windows treats all names with a . as a FQDN and skips FQDN resolution
• On Linux, you have a DNS suffix list, which is used when trying to resolve PQDNs. On Windows, you can only have 1 DNS suffix, which is the DNS suffix associated with that pod's namespace (mydns.svc.cluster.local for example). Windows can resolve FQDNs and services or names resolvable with just that suffix. For example, a pod spawned in the default namespace, will have the DNS suffix default.svc.cluster.local. Inside a Windows pod, you can resolve both kubernetes.default.svc.cluster.local and kubernetes, but not the in-betweens, like kubernetes.default or kubernetes.default.svc.
• On Windows, there are multiple DNS resolvers that can be used. As these come with slightly different behaviors, using the Resolve-DNSName utility for name query resolutions is recommended.

IPv6 networking

Kubernetes on Windows does not support single-stack "IPv6-only" networking. However, dual-stack IPv4/IPv6 networking for pods and nodes with single-family services is supported.

You can use IPv4/IPv6 dual-stack networking with l2bridge networks. See configure IPv4/IPv6 dual stack for more details.

Persistent storage

Windows has a layered filesystem driver to mount container layers and create a copy filesystem based on NTFS. All file paths in the container are resolved only within the context of that container.

• With Docker, volume mounts can only target a directory in the container, and not an individual file. This limitation does not exist with CRI-containerD runtime.
• Volume mounts cannot project files or directories back to the host filesystem.
• Read-only filesystems are not supported because write access is always required for the Windows registry and SAM database. However, read-only volumes are supported.
• Volume user-masks and permissions are not available. Because the SAM is not shared between the host & container, there's no mapping between them. All permissions are resolved within the context of the container.

As a result, the following storage functionality is not supported on Windows nodes:

• Volume subpath mounts: only the entire volume can be mounted in a Windows container
• Subpath volume mounting for Secrets
• Host mount projection
• Read-only root filesystem (mapped volumes still support readOnly)
• Block device mapping
• Memory as the storage medium (for example, emptyDir.medium set to Memory)
• File system features like uid/gid; per-user Linux filesystem permissions
• DefaultMode (due to UID/GID dependency)
• NFS based storage/volume support
• Expanding the mounted volume (resizefs)

Kubernetes volumes enable complex applications, with data persistence and Pod volume sharing requirements, to be deployed on Kubernetes. Management of persistent volumes associated with a specific storage back-end or protocol includes actions such as provisioning/de-provisioning/resizing of volumes, attaching/detaching a volume to/from a Kubernetes node and mounting/dismounting a volume to/from individual containers in a pod that needs to persist data.

The code implementing these volume management actions for a specific storage back-end or protocol is shipped in the form of a Kubernetes volume plugin. The following broad classes of Kubernetes volume plugins are supported on Windows:

In-tree volume plugins

Code associated with in-tree volume plugins ship as part of the core Kubernetes code base. Deployment of in-tree volume plugins do not require installation of additional scripts or deployment of separate containerized plugin components. These plugins can handle provisioning/de-provisioning and resizing of volumes in the storage backend, attaching/detaching of volumes to/from a Kubernetes node and mounting/dismounting a volume to/from individual containers in a pod. The following in-tree plugins support persistent storage on Windows nodes:

• awsElasticBlockStore
• azureDisk
• azureFile
• gcePersistentDisk
• vsphereVolume

FlexVolume plugins

Code associated with FlexVolume plugins ship as out-of-tree scripts or binaries that need to be deployed directly on the host. FlexVolume plugins handle attaching/detaching of volumes to/from a Kubernetes node and mounting/dismounting a volume to/from individual containers in a pod. Provisioning/De-provisioning of persistent volumes associated with FlexVolume plugins may be handled through an external provisioner that is typically separate from the FlexVolume plugins. The following FlexVolume plugins, deployed as PowerShell scripts on the host, support Windows nodes:

• SMB
• iSCSI

CSI plugins

Code associated with CSI plugins ship as out-of-tree scripts and binaries that are typically distributed as container images and deployed using standard Kubernetes constructs like DaemonSets and StatefulSets. CSI plugins handle a wide range of volume management actions in Kubernetes: provisioning/de-provisioning/resizing of volumes, attaching/detaching of volumes to/from a Kubernetes node and mounting/dismounting a volume to/from individual containers in a pod, backup/restore of persistent data using snapshots and cloning. CSI plugins typically consist of node plugins (that run on each node as a DaemonSet) and controller plugins.

CSI node plugins (especially those associated with persistent volumes exposed as either block devices or over a shared file-system) need to perform various privileged operations like scanning of disk devices, mounting of file systems, etc. These operations differ for each host operating system. For Linux worker nodes, containerized CSI node plugins are typically deployed as privileged containers. For Windows worker nodes, privileged operations for containerized CSI node plugins is supported using csi-proxy, a community-managed, stand-alone binary that needs to be pre-installed on each Windows node.

For more details, refer to the deployment guide of the CSI plugin you wish to deploy.

Command line options for the kubelet

The behavior of some kubelet command line options behave differently on Windows, as described below:

• The --windows-priorityclass lets you set the scheduling priority of the kubelet process (see CPU resource management)
• The --kubelet-reserve, --system-reserve , and --eviction-hard flags update NodeAllocatable
• Eviction by using --enforce-node-allocable is not implemented
• Eviction by using --eviction-hard and --eviction-soft are not implemented
• A kubelet running on a Windows node does not have memory restrictions. --kubelet-reserve and --system-reserve do not set limits on kubelet or processes running on the host. This means kubelet or a process on the host could cause memory resource starvation outside the node-allocatable and scheduler.
• The MemoryPressure Condition is not implemented
• The kubelet does not take OOM eviction actions

API compatibility

There are no differences in how most of the Kubernetes APIs work for Windows. The subtleties around what's different come down to differences in the OS and container runtime. In certain situations, some properties on workload resources were designed under the assumption that they would be implemented on Linux, and fail to run on Windows.

At a high level, these OS concepts are different:

• Identity - Linux uses userID (UID) and groupID (GID) which are represented as integer types. User and group names are not canonical - they are just an alias in /etc/groups or /etc/passwd back to UID+GID. Windows uses a larger binary security identifier (SID) which is stored in the Windows Security Access Manager (SAM) database. This database is not shared between the host and containers, or between containers.
• File permissions - Windows uses an access control list based on (SIDs), whereas POSIX systems such as Linux use a bitmask based on object permissions and UID+GID, plus optional access control lists.
• File paths - the convention on Windows is to use \ instead of /. The Go IO libraries typically accept both and just make it work, but when you're setting a path or command line that's interpreted inside a container, \ may be needed.
• Signals - Windows interactive apps handle termination differently, and can implement one or more of these:
  • A UI thread handles well-defined messages including WM_CLOSE.
  • Console apps handle Ctrl-C or Ctrl-break using a Control Handler.
  • Services register a Service Control Handler function that can accept SERVICE_CONTROL_STOP control codes.

Container exit codes follow the same convention where 0 is success, and nonzero is failure. The specific error codes may differ across Windows and Linux. However, exit codes passed from the Kubernetes components (kubelet, kube-proxy) are unchanged.

Field compatibility for container specifications

The following list documents differences between how Pod container specifications work between Windows and Linux:

• Huge pages are not implemented in the Windows container runtime, and are not available. They require asserting a user privilege that's not configurable for containers.
• requests.cpu and requests.memory - requests are subtracted from node available resources, so they can be used to avoid overprovisioning a node. However, they cannot be used to guarantee resources in an overprovisioned node. They should be applied to all containers as a best practice if the operator wants to avoid overprovisioning entirely.
• securityContext.allowPrivilegeEscalation - not possible on Windows; none of the capabilities are hooked up
• securityContext.capabilities - POSIX capabilities are not implemented on Windows
• securityContext.privileged - Windows doesn't support privileged containers
• securityContext.procMount - Windows doesn't have a /proc filesystem
• securityContext.readOnlyRootFilesystem - not possible on Windows; write access is required for registry & system processes to run inside the container
• securityContext.runAsGroup - not possible on Windows as there is no GID support
• securityContext.runAsNonRoot - this setting will prevent containers from running as ContainerAdministrator which is the closest equivalent to a root user on Windows.
• securityContext.runAsUser - use runAsUserName instead
• securityContext.seLinuxOptions - not possible on Windows as SELinux is Linux-specific
• terminationMessagePath - this has some limitations in that Windows doesn't support mapping single files. The default value is /dev/termination-log, which does work because it does not exist on Windows by default.

Field compatibility for Pod specifications

The following list documents differences between how Pod specifications work between Windows and Linux:

• hostIPC and hostpid - host namespace sharing is not possible on Windows
• hostNetwork - There is no Windows OS support to share the host network
• dnsPolicy - setting the Pod dnsPolicy to ClusterFirstWithHostNet is not supported on Windows because host networking is not provided. Pods always run with a container network.
• podSecurityContext (see below)
• shareProcessNamespace - this is a beta feature, and depends on Linux namespaces which are not implemented on Windows. Windows cannot share process namespaces or the container's root filesystem. Only the network can be shared.
• terminationGracePeriodSeconds - this is not fully implemented in Docker on Windows, see the GitHub issue. The behavior today is that the ENTRYPOINT process is sent CTRL_SHUTDOWN_EVENT, then Windows waits 5 seconds by default, and finally shuts down all processes using the normal Windows shutdown behavior. The 5 second default is actually in the Windows registry inside the container, so it can be overridden when the container is built.
• volumeDevices - this is a beta feature, and is not implemented on Windows. Windows cannot attach raw block devices to pods.
• volumes
  • If you define an emptyDir volume, you cannot set its volume source to memory.
• You cannot enable mountPropagation for volume mounts as this is not supported on Windows.

Field compatibility for Pod security context

None of the Pod securityContext fields work on Windows.

Node problem detector

The node problem detector (see Monitor Node Health) is not compatible with Windows.

Pause container

In a Kubernetes Pod, an infrastructure or “pause” container is first created to host the container. In Linux, the cgroups and namespaces that make up a pod need a process to maintain their continued existence; the pause process provides this. Containers that belong to the same pod, including infrastructure and worker containers, share a common network endpoint (same IPv4 and / or IPv6 address, same network port spaces). Kubernetes uses pause containers to allow for worker containers crashing or restarting without losing any of the networking configuration.

Kubernetes maintains a multi-architecture image that includes support for Windows. For Kubernetes v1.24 the recommended pause image is k8s.gcr.io/pause:3.6. The source code is available on GitHub.

Microsoft maintains a different multi-architecture image, with Linux and Windows amd64 support, that you can find as mcr.microsoft.com/oss/kubernetes/pause:3.6. This image is built from the same source as the Kubernetes maintained image but all of the Windows binaries are authenticode signed by Microsoft. The Kubernetes project recommends using the Microsoft maintained image if you are deploying to a production or production-like environment that requires signed binaries.

Container runtimes

You need to install a container runtime into each node in the cluster so that Pods can run there.

The following container runtimes work with Windows:

cri-containerd

You can use ContainerD 1.4.0+ as the container runtime for Kubernetes nodes that run Windows.

Learn how to install ContainerD on a Windows node.

Mirantis Container Runtime

Mirantis Container Runtime (MCR) is available as a container runtime for all Windows Server 2019 and later versions.

See Install MCR on Windows Servers for more information.

Windows OS version compatibility

On Windows nodes, strict compatibility rules apply where the host OS version must match the container base image OS version. Only Windows containers with a container operating system of Windows Server 2019 are fully supported.

For Kubernetes v1.24, operating system compatibility for Windows nodes (and Pods) is as follows:

Windows Server LTSC release

Windows Server 2019

Windows Server 2022

Windows Server SAC release

Windows Server version 20H2

The Kubernetes version-skew policy also applies.

Getting help and troubleshooting

Your main source of help for troubleshooting your Kubernetes cluster should start with the Troubleshooting page.

Some additional, Windows-specific troubleshooting help is included in this section. Logs are an important element of troubleshooting issues in Kubernetes. Make sure to include them any time you seek troubleshooting assistance from other contributors. Follow the instructions in the SIG Windows contributing guide on gathering logs.

Node-level troubleshooting

1. How do I know start.ps1 completed successfully?

   You should see kubelet, kube-proxy, and (if you chose Flannel as your networking solution) flanneld host-agent processes running on your node, with running logs being displayed in separate PowerShell windows. In addition to this, your Windows node should be listed as "Ready" in your Kubernetes cluster.

2. Can I configure the Kubernetes node processes to run in the background as services?

   The kubelet and kube-proxy are already configured to run as native Windows Services, offering resiliency by re-starting the services automatically in the event of failure (for example a process crash). You have two options for configuring these node components as services.

   1. As native Windows Services

      You can run the kubelet and kube-proxy as native Windows Services using sc.exe.

      # Create the services for kubelet and kube-proxy in two separate commands
      sc.exe create <component_name> binPath= "<path_to_binary> --service <other_args>"
      
      # Please note that if the arguments contain spaces, they must be escaped.
      sc.exe create kubelet binPath= "C:\kubelet.exe --service --hostname-override 'minion' <other_args>"
      
      # Start the services
      Start-Service kubelet
      Start-Service kube-proxy
      
      # Stop the service
      Stop-Service kubelet (-Force)
      Stop-Service kube-proxy (-Force)
      
      # Query the service status
      Get-Service kubelet
      Get-Service kube-proxy
      

   2. Using nssm.exe

      You can also always use alternative service managers like nssm.exe to run these processes (flanneld, kubelet & kube-proxy) in the background for you. You can use this sample script, leveraging nssm.exe to register kubelet, kube-proxy, and flanneld.exe to run as Windows services in the background.

      register-svc.ps1 -NetworkMode <Network mode> -ManagementIP <Windows Node IP> -ClusterCIDR <Cluster subnet> -KubeDnsServiceIP <Kube-dns Service IP> -LogDir <Directory to place logs>
      
      # NetworkMode      = The network mode l2bridge (flannel host-gw, also the default value) or overlay (flannel vxlan) chosen as a network solution
      # ManagementIP     = The IP address assigned to the Windows node. You can use ipconfig to find this
      # ClusterCIDR      = The cluster subnet range. (Default value 10.244.0.0/16)
      # KubeDnsServiceIP = The Kubernetes DNS service IP (Default value 10.96.0.10)
      # LogDir           = The directory where kubelet and kube-proxy logs are redirected into their respective output files (Default value C:\k)
      

      If the above referenced script is not suitable, you can manually configure nssm.exe using the following examples.

      # Register flanneld.exe
      nssm install flanneld C:\flannel\flanneld.exe
      nssm set flanneld AppParameters --kubeconfig-file=c:\k\config --iface=<ManagementIP> --ip-masq=1 --kube-subnet-mgr=1
      nssm set flanneld AppEnvironmentExtra NODE_NAME=<hostname>
      nssm set flanneld AppDirectory C:\flannel
      nssm start flanneld
      
      # Register kubelet.exe
      # Microsoft releases the pause infrastructure container at mcr.microsoft.com/oss/kubernetes/pause:3.6
      nssm install kubelet C:\k\kubelet.exe
      nssm set kubelet AppParameters --hostname-override=<hostname> --v=6 --pod-infra-container-image=mcr.microsoft.com/oss/kubernetes/pause:3.6 --resolv-conf="" --allow-privileged=true --enable-debugging-handlers --cluster-dns=<DNS-service-IP> --cluster-domain=cluster.local --kubeconfig=c:\k\config --hairpin-mode=promiscuous-bridge --image-pull-progress-deadline=20m --cgroups-per-qos=false  --log-dir=<log directory> --logtostderr=false --enforce-node-allocatable="" --network-plugin=cni --cni-bin-dir=c:\k\cni --cni-conf-dir=c:\k\cni\config
      nssm set kubelet AppDirectory C:\k
      nssm start kubelet
      
      # Register kube-proxy.exe (l2bridge / host-gw)
      nssm install kube-proxy C:\k\kube-proxy.exe
      nssm set kube-proxy AppDirectory c:\k
      nssm set kube-proxy AppParameters --v=4 --proxy-mode=kernelspace --hostname-override=<hostname>--kubeconfig=c:\k\config --enable-dsr=false --log-dir=<log directory> --logtostderr=false
      nssm.exe set kube-proxy AppEnvironmentExtra KUBE_NETWORK=cbr0
      nssm set kube-proxy DependOnService kubelet
      nssm start kube-proxy
      
      # Register kube-proxy.exe (overlay / vxlan)
      nssm install kube-proxy C:\k\kube-proxy.exe
      nssm set kube-proxy AppDirectory c:\k
      nssm set kube-proxy AppParameters --v=4 --proxy-mode=kernelspace --feature-gates="WinOverlay=true" --hostname-override=<hostname> --kubeconfig=c:\k\config --network-name=vxlan0 --source-vip=<source-vip> --enable-dsr=false --log-dir=<log directory> --logtostderr=false
      nssm set kube-proxy DependOnService kubelet
      nssm start kube-proxy
      

      For initial troubleshooting, you can use the following flags in nssm.exe to redirect stdout and stderr to a output file:

      nssm set <Service Name> AppStdout C:\k\mysvc.log
      nssm set <Service Name> AppStderr C:\k\mysvc.log
      

      For additional details, see NSSM - the Non-Sucking Service Manager.

3. My Pods are stuck at "Container Creating" or restarting over and over

   Check that your pause image is compatible with your OS version. The instructions assume that both the OS and the containers are version 1803. If you have a later version of Windows, such as an Insider build, you need to adjust the images accordingly. See Pause container for more details.

Network troubleshooting

1. My Windows Pods do not have network connectivity

   If you are using virtual machines, ensure that MAC spoofing is enabled on all the VM network adapter(s).

2. My Windows Pods cannot ping external resources

   Windows Pods do not have outbound rules programmed for the ICMP protocol. However, TCP/UDP is supported. When trying to demonstrate connectivity to resources outside of the cluster, substitute ping <IP> with corresponding curl <IP> commands.

   If you are still facing problems, most likely your network configuration in cni.conf deserves some extra attention. You can always edit this static file. The configuration update will apply to any new Kubernetes resources.

   One of the Kubernetes networking requirements (see Kubernetes model) is for cluster communication to occur without NAT internally. To honor this requirement, there is an ExceptionList for all the communication where you do not want outbound NAT to occur. However, this also means that you need to exclude the external IP you are trying to query from the ExceptionList. Only then will the traffic originating from your Windows pods be SNAT'ed correctly to receive a response from the outside world. In this regard, your ExceptionList in cni.conf should look as follows:

   "ExceptionList": [
                   "10.244.0.0/16",  # Cluster subnet
                   "10.96.0.0/12",   # Service subnet
                   "10.127.130.0/24" # Management (host) subnet
               ]
   

3. My Windows node cannot access NodePort type Services

   Local NodePort access from the node itself fails. This is a known limitation. NodePort access works from other nodes or external clients.

4. vNICs and HNS endpoints of containers are being deleted

   This issue can be caused when the hostname-override parameter is not passed to kube-proxy. To resolve it, users need to pass the hostname to kube-proxy as follows:

   C:\k\kube-proxy.exe --hostname-override=$(hostname)
   

5. With flannel, my nodes are having issues after rejoining a cluster

   Whenever a previously deleted node is being re-joined to the cluster, flannelD tries to assign a new pod subnet to the node. Users should remove the old pod subnet configuration files in the following paths:

   Remove-Item C:\k\SourceVip.json
   Remove-Item C:\k\SourceVipRequest.json
   

6. After launching start.ps1, flanneld is stuck in "Waiting for the Network to be created"

   There are numerous reports of this issue; most likely it is a timing issue for when the management IP of the flannel network is set. A workaround is to relaunch start.ps1 or relaunch it manually as follows:

   [Environment]::SetEnvironmentVariable("NODE_NAME", "<Windows_Worker_Hostname>")
   C:\flannel\flanneld.exe --kubeconfig-file=c:\k\config --iface=<Windows_Worker_Node_IP> --ip-masq=1 --kube-subnet-mgr=1
   

7. My Windows Pods cannot launch because of missing /run/flannel/subnet.env

   This indicates that Flannel didn't launch correctly. You can either try to restart flanneld.exe or you can copy the files over manually from /run/flannel/subnet.env on the Kubernetes master to C:\run\flannel\subnet.env on the Windows worker node and modify the FLANNEL_SUBNET row to a different number. For example, if node subnet 10.244.4.1/24 is desired:

   FLANNEL_NETWORK=10.244.0.0/16
   FLANNEL_SUBNET=10.244.4.1/24
   FLANNEL_MTU=1500
   FLANNEL_IPMASQ=true
   

8. My Windows node cannot access my services using the service IP

   This is a known limitation of the networking stack on Windows. However, Windows Pods can access the Service IP.

9. No network adapter is found when starting the kubelet

   The Windows networking stack needs a virtual adapter for Kubernetes networking to work. If the following commands return no results (in an admin shell), virtual network creation — a necessary prerequisite for the kubelet to work — has failed:

   Get-HnsNetwork | ? Name -ieq "cbr0"
   Get-NetAdapter | ? Name -Like "vEthernet (Ethernet*"
   

   Often it is worthwhile to modify the InterfaceName parameter of the start.ps1 script, in cases where the host's network adapter isn't "Ethernet". Otherwise, consult the output of the start-kubelet.ps1 script to see if there are errors during virtual network creation.

10. DNS resolution is not properly working

    Check the DNS limitations for Windows in this section.

11. kubectl port-forward fails with "unable to do port forwarding: wincat not found"

    This was implemented in Kubernetes 1.15 by including wincat.exe in the pause infrastructure container mcr.microsoft.com/oss/kubernetes/pause:3.6. Be sure to use a supported version of Kubernetes. If you would like to build your own pause infrastructure container be sure to include wincat.

12. My Kubernetes installation is failing because my Windows Server node is behind a proxy

    If you are behind a proxy, the following PowerShell environment variables must be defined:

    [Environment]::SetEnvironmentVariable("HTTP_PROXY", "http://proxy.example.com:80/", [EnvironmentVariableTarget]::Machine)
    [Environment]::SetEnvironmentVariable("HTTPS_PROXY", "http://proxy.example.com:443/", [EnvironmentVariableTarget]::Machine)
    

Further investigation

If these steps don't resolve your problem, you can get help running Windows containers on Windows nodes in Kubernetes through:

• StackOverflow Windows Server Container topic
• Kubernetes Official Forum discuss.kubernetes.io
• Kubernetes Slack #SIG-Windows Channel

Reporting issues and feature requests

If you have what looks like a bug, or you would like to make a feature request, please use the GitHub issue tracking system. You can open issues on GitHub and assign them to SIG-Windows. You should first search the list of issues in case it was reported previously and comment with your experience on the issue and add additional logs. SIG-Windows Slack is also a great avenue to get some initial support and troubleshooting ideas prior to creating a ticket.

If filing a bug, please include detailed information about how to reproduce the problem, such as:

• Kubernetes version: output from kubectl version
• Environment details: Cloud provider, OS distro, networking choice and configuration, and Docker version
• Detailed steps to reproduce the problem
• Relevant logs

It helps if you tag the issue as sig/windows, by commenting on the issue with /sig windows. This helps to bring the issue to a SIG Windows member's attention

What's next

Deployment tools

The kubeadm tool helps you to deploy a Kubernetes cluster, providing the control plane to manage the cluster it, and nodes to run your workloads. Adding Windows nodes explains how to deploy Windows nodes to your cluster using kubeadm.

The Kubernetes cluster API project also provides means to automate deployment of Windows nodes.

Windows distribution channels

For a detailed explanation of Windows distribution channels see the Microsoft documentation.

Information on the different Windows Server servicing channels including their support models can be found at Windows Server servicing channels.

2 - Guide for scheduling Windows containers in Kubernetes

Windows applications constitute a large portion of the services and applications that run in many organizations. This guide walks you through the steps to configure and deploy a Windows container in Kubernetes.

Objectives

• Configure an example deployment to run Windows containers on the Windows node
• (Optional) Configure an Active Directory Identity for your Pod using Group Managed Service Accounts (GMSA)

Before you begin

• Create a Kubernetes cluster that includes a control plane and a worker node running Windows Server
• It is important to note that creating and deploying services and workloads on Kubernetes behaves in much the same way for Linux and Windows containers. Kubectl commands to interface with the cluster are identical. The example in the section below is provided to jumpstart your experience with Windows containers.

Getting Started: Deploying a Windows container

To deploy a Windows container on Kubernetes, you must first create an example application. The example YAML file below creates a simple webserver application. Create a service spec named win-webserver.yaml with the contents below:

apiVersion: v1
kind: Service
metadata:
  name: win-webserver
  labels:
    app: win-webserver
spec:
  ports:
    # the port that this service should serve on
    - port: 80
      targetPort: 80
  selector:
    app: win-webserver
  type: NodePort
---
apiVersion: apps/v1
kind: Deployment
metadata:
  labels:
    app: win-webserver
  name: win-webserver
spec:
  replicas: 2
  selector:
    matchLabels:
      app: win-webserver
  template:
    metadata:
      labels:
        app: win-webserver
      name: win-webserver
    spec:
     containers:
      - name: windowswebserver
        image: mcr.microsoft.com/windows/servercore:ltsc2019
        command:
        - powershell.exe
        - -command
        - "<#code used from https://gist.github.com/19WAS85/5424431#> ; $$listener = New-Object System.Net.HttpListener ; $$listener.Prefixes.Add('http://*:80/') ; $$listener.Start() ; $$callerCounts = @{} ; Write-Host('Listening at http://*:80/') ; while ($$listener.IsListening) { ;$$context = $$listener.GetContext() ;$$requestUrl = $$context.Request.Url ;$$clientIP = $$context.Request.RemoteEndPoint.Address ;$$response = $$context.Response ;Write-Host '' ;Write-Host('> {0}' -f $$requestUrl) ;  ;$$count = 1 ;$$k=$$callerCounts.Get_Item($$clientIP) ;if ($$k -ne $$null) { $$count += $$k } ;$$callerCounts.Set_Item($$clientIP, $$count) ;$$ip=(Get-NetAdapter | Get-NetIpAddress); $$header='<html><body><H1>Windows Container Web Server</H1>' ;$$callerCountsString='' ;$$callerCounts.Keys | % { $$callerCountsString+='<p>IP {0} callerCount {1} ' -f $$ip[1].IPAddress,$$callerCounts.Item($$_) } ;$$footer='</body></html>' ;$$content='{0}{1}{2}' -f $$header,$$callerCountsString,$$footer ;Write-Output $$content ;$$buffer = [System.Text.Encoding]::UTF8.GetBytes($$content) ;$$response.ContentLength64 = $$buffer.Length ;$$response.OutputStream.Write($$buffer, 0, $$buffer.Length) ;$$response.Close() ;$$responseStatus = $$response.StatusCode ;Write-Host('< {0}' -f $$responseStatus)  } ; "
     nodeSelector:
      kubernetes.io/os: windows

1. Check that all nodes are healthy:

   kubectl get nodes
   

2. Deploy the service and watch for pod updates:

   kubectl apply -f win-webserver.yaml
   kubectl get pods -o wide -w
   

   When the service is deployed correctly both Pods are marked as Ready. To exit the watch command, press Ctrl+C.

3. Check that the deployment succeeded. To verify:

   • Two containers per pod on the Windows node, use docker ps
   • Two pods listed from the Linux control plane node, use kubectl get pods
   • Node-to-pod communication across the network, curl port 80 of your pod IPs from the Linux control plane node to check for a web server response
   • Pod-to-pod communication, ping between pods (and across hosts, if you have more than one Windows node) using docker exec or kubectl exec
   • Service-to-pod communication, curl the virtual service IP (seen under kubectl get services) from the Linux control plane node and from individual pods
   • Service discovery, curl the service name with the Kubernetes default DNS suffix
   • Inbound connectivity, curl the NodePort from the Linux control plane node or machines outside of the cluster
   • Outbound connectivity, curl external IPs from inside the pod using kubectl exec

Observability

Capturing logs from workloads

Logs are an important element of observability; they enable users to gain insights into the operational aspect of workloads and are a key ingredient to troubleshooting issues. Because Windows containers and workloads inside Windows containers behave differently from Linux containers, users had a hard time collecting logs, limiting operational visibility. Windows workloads for example are usually configured to log to ETW (Event Tracing for Windows) or push entries to the application event log. LogMonitor, an open source tool by Microsoft, is the recommended way to monitor configured log sources inside a Windows container. LogMonitor supports monitoring event logs, ETW providers, and custom application logs, piping them to STDOUT for consumption by kubectl logs <pod>.

Follow the instructions in the LogMonitor GitHub page to copy its binaries and configuration files to all your containers and add the necessary entrypoints for LogMonitor to push your logs to STDOUT.

Using configurable Container usernames

Starting with Kubernetes v1.16, Windows containers can be configured to run their entrypoints and processes with different usernames than the image defaults. The way this is achieved is a bit different from the way it is done for Linux containers. Learn more about it here.

Managing Workload Identity with Group Managed Service Accounts

Starting with Kubernetes v1.14, Windows container workloads can be configured to use Group Managed Service Accounts (GMSA). Group Managed Service Accounts are a specific type of Active Directory account that provides automatic password management, simplified service principal name (SPN) management, and the ability to delegate the management to other administrators across multiple servers. Containers configured with a GMSA can access external Active Directory Domain resources while carrying the identity configured with the GMSA. Learn more about configuring and using GMSA for Windows containers here.

Taints and Tolerations

Users today need to use some combination of taints and node selectors in order to keep Linux and Windows workloads on their respective OS-specific nodes. This likely imposes a burden only on Windows users. The recommended approach is outlined below, with one of its main goals being that this approach should not break compatibility for existing Linux workloads.

If the IdentifyPodOS feature gate is enabled, you can (and should) set .spec.os.name for a Pod to indicate the operating system that the containers in that Pod are designed for. For Pods that run Linux containers, set .spec.os.name to linux. For Pods that run Windows containers, set .spec.os.name to Windows.

The scheduler does not use the value of .spec.os.name when assigning Pods to nodes. You should use normal Kubernetes mechanisms for assigning pods to nodes to ensure that the control plane for your cluster places pods onto nodes that are running the appropriate operating system.

The .spec.os.name value has no effect on the scheduling of the Windows pods, so taints and tolerations and node selectors are still required to ensure that the Windows pods land onto appropriate Windows nodes.

Ensuring OS-specific workloads land on the appropriate container host

Users can ensure Windows containers can be scheduled on the appropriate host using Taints and Tolerations. All Kubernetes nodes today have the following default labels:

• kubernetes.io/os = [windows|linux]
• kubernetes.io/arch = [amd64|arm64|...]

If a Pod specification does not specify a nodeSelector like "kubernetes.io/os": windows, it is possible the Pod can be scheduled on any host, Windows or Linux. This can be problematic since a Windows container can only run on Windows and a Linux container can only run on Linux. The best practice is to use a nodeSelector.

However, we understand that in many cases users have a pre-existing large number of deployments for Linux containers, as well as an ecosystem of off-the-shelf configurations, such as community Helm charts, and programmatic Pod generation cases, such as with Operators. In those situations, you may be hesitant to make the configuration change to add nodeSelectors. The alternative is to use Taints. Because the kubelet can set Taints during registration, it could easily be modified to automatically add a taint when running on Windows only.

For example: --register-with-taints='os=windows:NoSchedule'

By adding a taint to all Windows nodes, nothing will be scheduled on them (that includes existing Linux Pods). In order for a Windows Pod to be scheduled on a Windows node, it would need both the nodeSelector and the appropriate matching toleration to choose Windows.

nodeSelector:
    kubernetes.io/os: windows
    node.kubernetes.io/windows-build: '10.0.17763'
tolerations:
    - key: "os"
      operator: "Equal"
      value: "windows"
      effect: "NoSchedule"

Handling multiple Windows versions in the same cluster

The Windows Server version used by each pod must match that of the node. If you want to use multiple Windows Server versions in the same cluster, then you should set additional node labels and nodeSelectors.

Kubernetes 1.17 automatically adds a new label node.kubernetes.io/windows-build to simplify this. If you're running an older version, then it's recommended to add this label manually to Windows nodes.

This label reflects the Windows major, minor, and build number that need to match for compatibility. Here are values used today for each Windows Server version.

Simplifying with RuntimeClass

RuntimeClass can be used to simplify the process of using taints and tolerations. A cluster administrator can create a RuntimeClass object which is used to encapsulate these taints and tolerations.

1. Save this file to runtimeClasses.yml. It includes the appropriate nodeSelector for the Windows OS, architecture, and version.

apiVersion: node.k8s.io/v1
kind: RuntimeClass
metadata:
  name: windows-2019
handler: 'docker'
scheduling:
  nodeSelector:
    kubernetes.io/os: 'windows'
    kubernetes.io/arch: 'amd64'
    node.kubernetes.io/windows-build: '10.0.17763'
  tolerations:
  - effect: NoSchedule
    key: os
    operator: Equal
    value: "windows"

1. Run kubectl create -f runtimeClasses.yml using as a cluster administrator
2. Add runtimeClassName: windows-2019 as appropriate to Pod specs

For example:

apiVersion: apps/v1
kind: Deployment
metadata:
  name: iis-2019
  labels:
    app: iis-2019
spec:
  replicas: 1
  template:
    metadata:
      name: iis-2019
      labels:
        app: iis-2019
    spec:
      runtimeClassName: windows-2019
      containers:
      - name: iis
        image: mcr.microsoft.com/windows/servercore/iis:windowsservercore-ltsc2019
        resources:
          limits:
            cpu: 1
            memory: 800Mi
          requests:
            cpu: .1
            memory: 300Mi
        ports:
          - containerPort: 80
 selector:
    matchLabels:
      app: iis-2019
---
apiVersion: v1
kind: Service
metadata:
  name: iis
spec:
  type: LoadBalancer
  ports:
  - protocol: TCP
    port: 80
  selector:
    app: iis-2019